Universal Motors 4D18 Betreibershandbuch PDF herunterladen (Seite 26)

LUBRICATION

Level 1.

Tools required: 8 mm Open End Wrench, Cross Head Screwdriver,

Clean rag

Parts Required: ECHO

LUBE

8 oz. (P/N 91014) or Lithium Base

Grease.

Gear Housing

1. Clean all loose debris from gear box.

2. Remove plug (A) and check level of grease.

3. Add grease if necessary, DO NOT over fill.

Drive Shaft

1. Loosen two (2) screws (B) and remove center locating screw (C).

Pull gear box and shield from drive shaft housing.

2. Pull flexible cable from the drive shaft housing, wipe clean and

recoat with a thin coating [15 ml (1/2 oz.)] of grease.

3. Slide the flexible cable back in the drive housing. DO NOT get

dirt on the flex cable.

4. Install the gear housing and shield assembly.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Keine Kommentare

Universal Motors 4D18 Betreibershandbuch Seite 26